WINDFORCE 3X COOLING SYSTEM
The WINDFORCE 3X cooling system features 3x 80mm unique blade fans, alternate spinning, 3 composite copper heat pipes direct touch GPU, 3D active fan and Screen cooling, which together provide high efficiency heat dissipation.
Reduce the turbulence of adjacent fans and increase air pressure.
GIGABYTE turns the adjacent fans in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.
3D ACTIVE FAN
The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU is in a low load or low power game.
UNIQUE BLADE FAN
The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface.
GRAPHENE NANO LUBRICANT
Graphene nano lubricant can extend the life of fan by 2.1 times, close to the life of double ball bearing, and is quieter.
Extended heatsink design allows air flow to pass through, providing better heat dissipation.
HEAT PIPES DIRECT TOUCH
The shape of the pure copper heat pipe maximizes the direct contact area with the GPU. The heat pipe also covers the VRAM through a large metal plate contact to ensure proper cooling.
PROTECTION BACK PLATE
The back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.
The graphics card uses the better power phase design to allow the MOSFET to operate at lower temperature, and over-temperature protection design and load balancing for each MOSFET, plus the Ultra Durable certified chokes and capacitors, to provide excellent performance and longer system life.
FRIENDLY PCB DESIGN
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.
The cutting edge intuitive interface allows you to adjust the clock speed, voltage, fan performance and power target in real-time according to your game’s requirements.
Powered by AMD RDNA 2 Radeon RX 6600
Integrated with 8GB GDDR6 128-bit memory interface
WINDFORCE 3X Cooling System with alternate spinning fans
Graphene nano lubricant
Protection back plate
Chipset Manufacturer AMD
Chipset Model Name Radeon RX
Chipset Model Number 6600
Chipset Additional Information EAGLE
Chip Clock Up to 2044 MHz
Memory Size 8192 MB
Memory Clock 14 Gbps
Memory Type GDDR6
Memory Width 128 bit
Memory Bandwidth 224 GB/s
Video Card Bus Type PCI Express
Video Card Bus Version 4.0 x16
HDMI Port 2 x HDMI 2.1
DisplayPort 2 x DisplayPort 1.4a
Operating Systems Supported 1 x PCI Express 4.0 x16 slot
Recommended 500W or greater PSU with 1 x 8-pin PCIe connector
Multiple Monitor Support (Max) Yes (4)
Maximum Resolution 7680 x 4320 pixels
Form Factor Graphics Card
In The Box Graphics Card
Width 41 mm (Dual Slot)
Depth 282 mm
Height 113 mm
Pack Quantity 630 g
Warranty 3 Years
Interface Type PCI Express 4.0 x16
VGA Connection No
DVI Connection No
HDMI Connection Yes
Graphics Usability Gaming
DisplayPort Connection Yes
Direct X Support Direct X 12
Cooler Type Dynamic Fan
Low Profile No
AMD Radeon RX 6600
PCI-E Pin Type 8-Pin
Cooling Technology Dynamic Fan
VR Ready AMD
GPU Length 282 mm
Card Width Dual Slot
Graphics Chipset Radeon RX 6600